Search results for "central boiler thermopex, 3/4""

1. 90 Degree Street Elbow, 3/4''
   

   90 _ Street Elbow in different sizes.
2. Kit, Ss Air Channel Install, E-Classic 3200
   

   Refer to the following kit descriptions and furnace applications. If you need help, contact us. Available Kits Kit p/n 2500066 - For E-Classic 2400 models produced with removable side air channels with serial # E301610 to E303122. Kit p/n 2500089...
3. Tee, 1 1/4" Npt, Black
   

   Black Tee (p/n 133) can be used for vent option near pump. Brass Tee (p/n 3850) can be used in domestic water situations. Black Tee (p/n 418) can be used to install 1-1/4" thermostatic valve.
4. ASM,T/C,REACTION CHAMBER,CE300 230V
   

   ASM, T/C, REACTION CHAMBER, CE300 230V KIT,T/C,REACTION CHAMBER,CE 50/ECL
5. 50K Btu Fan Coil Unit Heat Exchanger
   

   50k Btu fan coil unit includes housing, fan, heat exchanger coil and louvers. Btu range: 20k-50k Btu. Approximate dimensions: 16-1/4" x 17" x 13-1/4". NOTE: Always use Teflon pipe sealant tape when installing heat exchangers to eliminate leaks.
6. Spring, Gas, Fill Hood, Max
   

   Replacement Hopper Lid Shock for M175 or M250/M255 P models.
7. Rope Ring, 2" Low Density Braid, 8"ID
   

   Rope ring, 2" Low Density Braid, 8" I.D. Replacement rope ring used between chimney tee connector and furnace. Affected models: E-Classic 1400/2300/2400/3200/3250, Classic 4030/5036/6048, Classic Edge 750/760/960, and CleanFire 700/900. NOTE: Silicone is not included.
8. ASM Heat Exchanger Shell & Tube, 27'' Water to Water
   

   A water-to-water, continuous-flow heat exchanger for commercial water heater applications. Side ports are 3/4" FIP; end ports are 1-1/2" FIP. IMPORTANT: Use the Shell & Tube Heat Exchangers (p/n 148, 151 or 177) when heating "salt chlorinated" pools and hots....
9. Water Level Float Switch
   

   Replacement water level float switch for E-Classic, Maxim, Classic Edge and Forge models. Old part# 2500361 was replaced by the new part# 2500467.
10. Aquastat Well , 1/2'' Threaded
    

    For controlling water temperature in pools, spas, etc., Immersible, temperature range of 40-180 _F in one-degree differential. With pool or hot tub application, it is recommended to use a stainless steel well (p/n 1248), sold separately.