Search results for "Central Boiler ThermoPEX, 3/4""

1. Thermostatic Valve and Body Kit 3/4" NPT
   

   Thermostatic Valve prevents the water temperature from dropping below the optimal operating temperature. Note: This kit includes the valve body and the valve only. The mounting bracket 1365-011 is NOT included in this kit. 
2. Fan Convector, 26K
   

   Central Boiler fan-forced convector. Quiet operation, integral filters and thermostat connections. 3/4" FPT fittings and on-off thermostat switch. Output up to 26,000 Btu/hr. Color - taupe. 24-Volt Thermostat (p/n 588 or 8200008) is optional.
3. Heat Exchanger Coil (Water To Air) (140K Btu)
   

   Water-to-air heat exchanger coil with straight. 3/4" FPT outlets. Used in forced-air furnaces with plenum size of approximately 20" x 20". Dimensions: 19" x 21" x 4-1/8". Picture shows additional parts available spearately.
4. Thermal Valve Probe Only G 3/4" MAXIM (E)
   

   Replacement thermal valve body for Maxim models.  Thermal Valve Body P/N 9296.
5. Heat Exchanger Coil Water to Air, 100K BTU
   

   Water-to-air Heat Exchanger Coil with straight 3/4" FPT outlets. Used in forced-air furnaces with plenum size of approximately 17" x 18". Dimensions: 16-1/2" x 19" x 4-1/8".
6. Valve, 3/4" Therm. Mix, 70-180 Deg
   

   For controlling water temperature in various types of radiant heat systems. Temperature range 70 F -180 F (except p/n 306, range 70 F - 145 F). These are not anti-scald valves and are not intended to be used on water...
7. Heat Exchanger, Plate 5X12-6 Water To Water, 3/4" Port
   

   The Plate Heat Exchanger is a compact, high- performance, water-to-water, continuous flow heat exchanger with MPT ports. Units are 316L stainless, copper-brazed. Application: Water heaters
8. Heat Exchanger Coil (Water To Air)(80K Btu)
   

   Water-to-air heat exchanger coil with straight 3/4" FPT outlets. Used in forced-air furnaces with plenum size of approximately 13" x 18". Dimensions: 12-3/4" x 18" x 4-1/8".
9. Digital Temperature Controller, Ts2-110R, Prog
   

   Replacement Digital Temperature Controller for Classic model outdoor furnaces only (after s/n 25151). Control panel. Temperature Sensor Probe (p/n 727) must be purchased separately. The 10 degree operational window can be set to trigger between 165 - 195 degrees F....
10. Fitting Brass 25 mm PEX x 3/4 Male Thread, NPT for 25 mm ThermoPEX (Pack of 10)
    

    For proper fit with 25mm Thermo PEX, only use these fittings. Brass 25 mm PEX x NPT. 25mm PEX X 3/4” Male thread